A dual microsphere based on PLGA and chitosan for delivering the oligopeptide derived from BMP-2

In this paper, we document the process and findings of preparing dual poly (lactide-co-glycolide)/chitosan microspheres (PLGA/CS MSs) for osteoinductive oligopeptide derived from BMP-2 (abbreviated as Peptide-24). Through adjusting the amount of Peptide-24, three kinds of PLGA/CS MSs were successfully constructed in twice encapsulations. We studied the morphology, size distribution and loading efficiency of the PLGA/CS MSs. We also focused on the pH change of the environment and the molecular weight of the matrix during the degradation process of PLGA/CS MSs. More specifically, the release of Peptide-24 from three kinds of PLGA/CS MSs was monitored in PBS at 37 °C and pH 7.4. The structural stability of the released Peptide-24 was detected by Far-UV circular dichroism and MALDI-TOF-MS analysis. The mean sizes of the three kinds of PLGA/CS MSs are 47.5, 63.0 and 89.1 μm; and their drug-loading rates are 2.61, 3.21 and 2.21%, respectively. Comparing with Chitosan microspheres (abbreviated as CS MSs), the PLGA/CS MSs have excellent release curves with zero-order kinetics and controllable model. The incubation solution of PLGA/CS MSs avoided producing acid environment as poly (lactide-co-glycolide) microspheres (PLGA MSs) did, which was explained by analyzing the molecular weight of the matrix. The released oligopeptide kept its original structure and relative molecular weight throughout the procedures of encapsulation, storage and release. This indicates its structure stability. Thus, we conclude that dual PLGA/CS MSs is a promising vehicle that is suitable for the delivery of bioactive factors.     

强聚焦混合偏振矢量光束在瑞利粒子上产生的辐射力

理论研究了强聚焦混合偏振矢量光束作用在瑞利粒子的辐射力,推导出混合偏振矢量光束深聚焦在焦平面处产生辐射力的计算表达式,数值模拟了焦平面附近轴向光束强度分布及数值孔径与径向系数对辐射力分布的影响.结果表明,强聚焦混合偏振矢量光束深聚焦后在焦平面附近产生的辐射力在一定情况下能够实现对瑞利粒子的三维捕获,并且受数值孔径和径向系数的影响,其中径向系数影响较为明显.大量数据整合结果表明当径向系数大于3时,才能实现与光阑数值孔径相匹配,完成对焦平面附近瑞利粒子的三维捕获.     

Numerical simulations of partial elements excitation for hemispherical high-intensity focused ultrasound phased transducer

The hemispherical phased transducer maximizes the coverage of the skull and the ultrasonic energy per unit area of the skull is minimized, thereby reducing the risk of skull burns, but the transducer has a small focal area adjustment range, increasing the focal length of treatment is an urgent question for this type of transducer. In this paper, a three-dimensional high-intensity focused ultrasound (HIFU) transcranial propagation model is established based on the human head structure. The finite difference time domain (FDTD) is combined with the Westervelt acoustic wave nonlinear propagation equation and Penne's biological heat conduction equation for numerical simulation of the sound pressure field and temperature field. Forming a treatable focal area in a small-opening hemispherical transducer with a small amount of numerical simulation calculation focusing at a set position to determine the minimum partial excitation area ratio of focusing. And then, applying these preliminary results to a large-opening diameter hemispherical transducer and the temperature field formed by it or full excitation is studied. The results show that the focus area with the excitation area ratio of less than 22% moves forward to the transducer side when the excitation sound is formed. When the excitation area ratio is greater than or equal to 23%, it focuses at the set position. In the case of partial incentives, using 23% of the partial array, the adjustable range of the treatable focal area formed in the three-dimensional space is larger than that of the full excitation.     

Application of a new focused microwave technology with species-specific isotope dilution analysis for the quantitative extraction of organometallic contaminants in solid environmental matrices

A new self-tuning single-mode-focused microwave technology has been evaluated in this work to perform the quantitative routine extraction of organometallic species from solid matrices of environmental interest. Species-specific isotope dilution analysis has been employed to better investigate the real influence of the microwave-assisted extractions on the final results. The advantages of such methodology in comparison with other established microwave units for the routine speciation analysis of organomercury and organotin compounds are discussed (such as the capability of using disposable glass vials, a self-tuning mode to provide an accurate control of the temperature and pressure inside of the vials, and the possibility of performing automated sequence of extractions with low sample size). The results obtained in this work demonstrated that such technology provides a fast and reliable quantitative extraction of the organometallic species in a wide range of extraction conditions even when the multi-elemental (Sn and Hg) species-specific determination is carried out.     

Mixed electrolytes in hydrophobic interaction chromatography†

An essential part of the modulation of protein‐binding capacity in hydrophobic interaction chromatography is the buffer‐salt system. Besides using “single” electrolytes, multicomponent electrolyte mixtures may be used as an additional tool. Both the protein solubility and the binding capacity depend on the position of a salt in the so‐called Hofmeister series. Specific interactions are observed for an individual protein‐salt combination. For salt mixtures, selectivity, recovery, and binding capacity do not behave like for the single salts that are positioned in between the two mixed components in the Hofmeister series, as the continuous correlation would suggest. Thus, finding strategies for mixed salts could potentially lead to improved capacities in hydrophobic interaction chromatography. Mixtures of ammonium sulfate, sodium citrate, sodium sulfate, sodium chloride, sodium acetate, and glycine were used to investigate the binding capacities for lysozyme and a monoclonal antibody on various hydrophobic resins. Resin capacity for two investigated proteins increases when mixtures consisting of a chaotropic and a kosmotropic salt are applied. It seems to be related to the rather basic isoelectric points of the proteins.     

破片聚焦战斗部的动态杀伤威力设计

破片聚焦战斗部威力设计通常针对静爆条件,但在实战条件下,由于弹目相对速度和战斗部沿轴线方向破片初速梯度的影响,破片动态飞散角将重新合成,导致聚焦破片散开,破片在靶面的分布密度大为降低(可降低到静态条件的1/2)。采用射击迹线法对破片聚焦战斗部在静爆和动态条件下的破片飞散过程和破片在靶面的分布密度进行了仿真研究,提出了破片聚焦战斗部的动态杀伤威力设计概念,以破片平行聚焦战斗部为例给出了动态杀伤威力的实现方法。     

Padé–Legendre approximants for uncertainty analysis with discontinuous response surfaces

A novel uncertainty propagation method for problems characterized by highly non-linear or discontinuous system responses is presented. The approach is based on a Padé–Legendre (PL) formalism which does not require modifications to existing computational tools (non-intrusive approach) and it is a global method. The paper presents a novel PL method for problems in multiple dimensions, which is non-trivial in the Padé literature. In addition, a filtering procedure is developed in order to minimize the errors introduced in the approximation close to the discontinuities. The numerical examples include fluid dynamic problems characterized by shock waves: a simple dual throat nozzle problem with uncertain initial state, and the turbulent transonic flow over a transonic airfoil where the flight conditions are assumed to be uncertain. Results are presented in terms of statistics of both shock position and strength and are compared to Monte Carlo simulations.     

Effect of graded triple delta-doped sheets on the performance of GaAs based dual channel pseudomorphic high electron mobility transistors

The characteristics of InGaP/InGaAs/GaAs dual channel pseudomorphic high electron mobility transistors (DCPHEMTs) with different graded triple delta-doped sheets are investigated and experimentally demonstrated. Based on a two-dimensional simulator of ATLAS, the band diagrams, electron densities and DC characteristics of studied devices are comprehensively analyzed. Due to the use of properly graded triple delta-doped sheets, good pinch-off and saturation characteristics, improved transport properties and wide current swing are obtained. For comparison, a practical DCPHEMT with good device performances is fabricated as well. It is found that the simulated data are in good agreement with experimental results.     

The dual bases for the Bézier-Said-Wang type generalized Ball polynomial bases and their applications

A unifying representation for the existing generalized Ball bases and the Bernstein bases are given. Then the dual bases for the Bézier-Said-Wang type generalized bases (BSWGB for short) are presented. The Marsden identity and the mutual transformation formulas between Bézier curve and Bézier-Said-Wang type generalized curve (BSWGB curve) are also given. These results are very useful for the applications of BSWGB curves and their popularization in CAGD. Numerical examples are also given to show the effectiveness of our methods.     

Increasing the antioxidant capability via the synergistic effect of coupling diphenylamine with sterically hindered phenol

A series of novel diphenylamine-phenol antioxidants were synthesised that combined the two antioxidant types into a single molecule. These antioxidants were then functionalised with alkyl chains to aid their solubility in hydrocarbon media. As part of a structure-activity study, diphenylamine derivatives were also generated bearing carboxylic acid functionalities in either the ortho, meta or para position with respect to the secondary amine. Methyl or ethyl spacers were also incorporated between the carboxylic acid and the aromatic ring. The antioxidant ability of the diphenylamine-phenols was evaluated using Differential Scanning Calorimetry (DSC) and compared to commercially available antioxidants Irganox L135 and Irganox L57 both as individual components and when blended together. The diphenylamine-phenol antioxidant with an ethyl spacer between the diphenylamine and carboxylic acid in the meta position with respect to the secondary amine functionality showed an impressive oxidation induction time of ca. 24 min in direct comparison with the blend of Irganox L135 and Irganox L57 (ca. 16 min).